Presentation On ROM
Download
ROM Presentation Transcript:
1.Computer - ROM
2.ROM stands for Read Only Memory. The memory from which we can only read but cannot write on it. This type of memory is non-volatile. The information is stored permanently in such memories during manufacture.
A ROM, stores such instruction as are required to start computer when electricity is first turned on, this operation is referred to as bootstrap. ROM chip are not only used in the computer but also in other electronic items like washing machine and microwave oven.
3.ROM
4.Various types of ROM
MROM (Masked ROM)
The very first ROMs were hard-wired devices that contained a pre-programmed set of data or instructions.
These kind of ROMs are known as masked ROMs. It is inexpensive ROM.
5.PROM (Programmable Read only Memory)
PROM is read-only memory that can be modified only once by a user.
The user buys a blank PROM and enters the desired contents using a PROM programmer. Inside the PROM chip there are small fuses which are burnt open during programming.
It can be programmed only once and is not erasable.
6.EPROM(Erasable and Programmable Read Only Memory)
The EPROM can be erased by exposing it to ultra-violet light for a duration of up to 40 minutes. Usually, a EPROM eraser achieves this function.
During programming an electrical charge is trapped in an insulated gate region.
The charge is retained for more than ten years because the charge has no leakage path. For erasing this charge, ultra-violet light is passed through a quartz crystal window(lid).
This exposure to ultra-violet light dissipates the charge. During normal use the quartz lid is sealed with a sticker.
7.EEPROM(Electrically Erasable and Programmable Read Only Memory)
The EEPROM is programmed and erased electrically. It can be erased and reprogrammed about ten thousand times.
Both erasing and programming take about 4 to 10 ms (milli second). In EEPROM, any location can be selectively erased and programmed.
EEPROMs can be erased one byte at a time, rather than erasing the entire chip. Hence, the process of re-programming is flexible but slow.
8.Advantages of ROM
Non-volatile in nature
These can not be accidentally changed
Cheaper than RAMs
Easy to test
More Reliable than RAMs
These are static and do not require refreshing
Its contents are always known and can be verified
Download
ROM Presentation Transcript:
1.Computer - ROM
2.ROM stands for Read Only Memory. The memory from which we can only read but cannot write on it. This type of memory is non-volatile. The information is stored permanently in such memories during manufacture.
A ROM, stores such instruction as are required to start computer when electricity is first turned on, this operation is referred to as bootstrap. ROM chip are not only used in the computer but also in other electronic items like washing machine and microwave oven.
3.ROM
4.Various types of ROM
MROM (Masked ROM)
The very first ROMs were hard-wired devices that contained a pre-programmed set of data or instructions.
These kind of ROMs are known as masked ROMs. It is inexpensive ROM.
5.PROM (Programmable Read only Memory)
PROM is read-only memory that can be modified only once by a user.
The user buys a blank PROM and enters the desired contents using a PROM programmer. Inside the PROM chip there are small fuses which are burnt open during programming.
It can be programmed only once and is not erasable.
6.EPROM(Erasable and Programmable Read Only Memory)
The EPROM can be erased by exposing it to ultra-violet light for a duration of up to 40 minutes. Usually, a EPROM eraser achieves this function.
During programming an electrical charge is trapped in an insulated gate region.
The charge is retained for more than ten years because the charge has no leakage path. For erasing this charge, ultra-violet light is passed through a quartz crystal window(lid).
This exposure to ultra-violet light dissipates the charge. During normal use the quartz lid is sealed with a sticker.
7.EEPROM(Electrically Erasable and Programmable Read Only Memory)
The EEPROM is programmed and erased electrically. It can be erased and reprogrammed about ten thousand times.
Both erasing and programming take about 4 to 10 ms (milli second). In EEPROM, any location can be selectively erased and programmed.
EEPROMs can be erased one byte at a time, rather than erasing the entire chip. Hence, the process of re-programming is flexible but slow.
8.Advantages of ROM
Non-volatile in nature
These can not be accidentally changed
Cheaper than RAMs
Easy to test
More Reliable than RAMs
These are static and do not require refreshing
Its contents are always known and can be verified
No comments:
Post a Comment